Ningbo XiaoYang Science and Technology Co., Ltd.
language
High quality MPPT Solar Charge Controller(Tracer1206AN/ 1210AN/ 3210AN/2206AN/r2210AN/4210AN)

High quality MPPT Solar Charge Controller(Tracer1206AN/ 1210AN/ 3210AN/2206AN/r2210AN/4210AN)

Features:
♦ Advanced MPPT technology, with efficiency no less than 99.5%
♦ Ultra-fast tracking speed and guaranteed tracking efficiency
♦ Advanced MPPT control algorithm to minimize the maximum power point
loss rate and loss time
♦ Wide MPP operating voltage range
♦ High quality components, perfecting system performance, with maximum conversion
efficiency of 98%
♦ Accurate recognition and tracking of multiple-peaks maximum power point
♦ International famous brands of ST and IR's components of high quality and low failure
rate are used, which can ensure the product’s service life
♦ Charging power and current limitation function
♦ Compatible with lead-acid and lithium-ion batteries
♦ Battery temperature compensation function
♦ Real-time energy statistics function
♦ Overheating power reduction function
♦ Multiple load work modes
♦ The communication port adopts professional protection chip, which can provide 5VDC power supply,
and has over-current and short-circuit protection
♦ With RS-485 communication bus interface and Modbus communication protocol, it is available to meet
various communication requirements in different situations
♦ Monitor and set the parameters via mobile phone APP or PC software
♦ Full-load operation without any drop in capacity within the range of working environment temperature
♦ Extensive electronic protection

High quality MPPT Solar Charge Controller(Tracer1206AN/ 1210AN/ 3210AN/2206AN/r2210AN/4210AN) parameters

Model Tracer 1206AN Tracer 2206AN Tracer 1210AN Tracer 2210AN Tracer 3210AN Tracer 4210AN
System nominal voltage 12/24VDC① Auto
Rated charge current 10A 20A 10A 20A 30A 40A
Rated discharge current 10A 20A 10A 20A 30A 40A
Battery voltage range 8~32V
Max. PV open circuit voltage

60V②/46V③

100V②/92V③
MPP voltage range ((Battery voltage+2V)~36V ((Battery voltage+2V)~72V
Max. PV input power

130W/12V

260W/24V

260W/12V

520W/24V

130W/12V

260W/24V

260W/12V

520W/24V

390W/12V

780W/24V

520W/12V

1040W/24V

Self-consumption ≤12mA
Discharge circuit voltage drop ≤0.23V
Temperature compensate coefficient④ -3mV/℃/2V(Default)
Grounding Common negative
RS485 interface 5VDC/100mA
LCD backlight time 60S(Default)

①When a lead-acid battery is used, the controller hasn’t the low temperature protection

②At minimum operating environment temperature

③At 25℃ environment temperature

④When a lithium-ion battery is used, the system voltage can’t be identified automatically

 

Electrical Parameters

 

Working environment temperature◆ -25℃~+50℃(100% input and output)
Storage temperature range -20℃~+70℃
Relative humidity ≤95%, N.C.
Enclosure IP30

◆ The controller can full load working in the working environment temperature, When the internal temperature is 81℃, the reducing power charging mode is turned on. Refer to P24

 

Mechanical Parameters

 

Dimension(mm) 172x139x44 220x154x52 228x164x55 252x180x163
Mounting dimension(mm) 130x130 170x145 170x164 210x171
Mounting hole size(mm) ø5
Terminal(mm²) 12AWG 64AWG 64AWG 64AWG
Recommended cable (mm²) 12AWG 10AWG 8AWG 6AWG
Weight(kg) 0.57 0.94 1.26 1.65

 

Contact Us