Ningbo XiaoYang Science and Technology Co., Ltd.
language

How to properly use a sine wave inverter?

Update:2022-05-19
Abstract:Today's inverters have square wave output and sine wave output. The efficiency of square wave output is relatively high, but the indicators of inverte...
Today's inverters have square wave output and sine wave output. The efficiency of square wave output is relatively high, but the indicators of inverters using square wave output will change, so it is not suitable for some high accuracy requirements. . Although the sine wave inverter is not as efficient as the square wave inverter, it makes up for the problem of square wave accuracy. Therefore, sine wave inverters are also widely used in production and life, so how should we use sine wave inverters correctly?

First of all, you should find relevant technicians for installation. The installation environment should be a ventilated and clean environment, and it should be ensured that the output voltage of the DC power supply or the voltage of the battery is consistent with the DC input voltage required by the inverter. Install according to the installation manual.

It can be used after installation. Before use, you should read the instruction manual carefully. First, the inverter is turned on. Make sure that the DC input voltage and AC output voltage of the power supply are connected correctly and stably. After ensuring the correctness of the previous step, you can turn on the switch of the DC input, and then the inverter The inverter will make a sound of 'beep', and then the inverter will enter the self-checking state. At this time, the inverter has been turned on and can be used. Here, it is necessary to turn on the inverter first, and then turn on the load.

During use, the inverter system has a sound and light warning system. If you want to mute it, you just need to long press the warning button to turn it off. If you want to turn it on again, you only need to long press the warning button again. . When the use is finished, turn off the load first, and then turn off the inverter, just press the shutdown button and see the indicator light slowly dims.
Contact Us